+254 713 777 111 info@sheffieldafrica.com
Account
Sheffield Fabrications 20 Foot Containerized Cold Room

20 FOOT CONTAINERIZED COLD ROOM | Sheffield Africa Kenya

Total Surface Area(sq.m) : 52.7343

Total Volume (Cubic.m) : 32.66594

Running meters : 16.48

Item No : FAB/CAT/00016

Model No : CCR1

Brand :

Category : CONTAINERIZED COLD ROOMS

This is a 20 foot containerized cold room, supplied complete with 80 mm insulated panels, epoxy floor, condensing unit, evaporator, control panel and insulated door. It holds 32.7 cubic metres.

Walls and roof are 80 mm polyurethane foam panels clad in pre-painted galvanised iron, over a scratch-resistant epoxy floor that is seamless and easy to clean. A microprocessor control panel handles temperature, automatic defrost, phase failure and over-current protection. Sheffield installs, tests and commissions the room, trains the staff who will use it and hands over an FMC plan.

Length5.89 m
Width2.35 m
Height2.36 m
Total Surface Area(sq.m)52.7343
Total Volume (Cubic.m)32.66594
Running meters16.48

Supply of Panels

  • Polyurethane Foam (PUF) Wall and roof 80MM Thick
  • Monolithic sandwich construction which is the most advanced, ensures best insulation and uniform structure.
  • Cladding material is Pre-painted Galvanized Iron (PPGI)
  • Injected Density 42 Kg/m3
  • Thermal conductivity 0.18 – 0.28 W/m2k
  • Modulus of Elasticity Kg/cm2 40 – 70 Kg/cm
  • Compression Strength Kg/cm2 1.7 – 2.2 Kg/cm2
  • Breaking Elongation 5 – 10%
  • Water Absorption 1.7 – 2.3 Δp/V
  • Operation Temp -60 - +90C


Floor Type

  • Epoxy Floor Type
  • 0.3 mm thick layer of Epoxy with 80MM thick PUF Insulation
  • Scratch Resistant
  • Seamless and easy to clean
  • Civil Screeding in Client Scope


Condensing Unit

  • Condensing unit-air cooled SLIM-ICM15AS
  • Cooling Capacity- 14590 BTU/Hr (4.27 kW)
  • Low power consumption
  • Danfoss - Hermetic Scroll compressor type
  • R404a Refrigerant
  • Air Cooled Aluminum Fin & Copper Tube Type
  • 8 Deg.C Evaporating Temperature & 50 Deg.C Condensing temperature.
  • 220 v/ 50 HZ/ 3 PH Connected Load 3.10 kW
  • Unit Body; Aluminium, PU type Powder Coated, Corrosion resistant and nice appearance.



Evaporator

  • Ceiling Mounted Evaporator Unit /HEAT EXCHANGER A7032 303H - Capacity - 17913 BTU/Hr (5 kW) - Body Size - 58" x 13" x 16" - CMH /
  • Throw- 4680/10 - Heat Transfer Area- 32 Sq Mtr
  • Fan Nos - 3; low-temperature resistance axial fan motor with internal terminal box.
  • 300 mm fan diameter
  • Heater Defrost cycle that is leak proof.
  • Unit Body; Aluminium, PU type Powder Coated, Corrosion resistant and nice appearance.
  • Maintenance; Compact, adjustable & easily openable side panels for easy installation.


Control Panel

  • Control Panel - Standard Control Panel equipped with Microprocessor based controller cum indicator along with required electrical / electronic components
  • Temperature Controls for Positive temperature applications with LED Indicator lights.
  • Phase failure Prevention mechanism
  • High pressure / low pressure control mechanism
  • Over current protection
  • Auto Defrost mechanism
  • Delay timer
  • Solenoid valves
  • Standard Control Panel equipped with Microprocessor based controller cum indicator along with required electrical / electronic components.


Insulated Door

  • Insulated Swing Door Type
  • 80 mm thick Polyurethane Foam panels with door heater provision
  • Heavy duty hardware
  • Gasket to seal off air leaks
  • Safety Release Handle from inside for safety


Electrical materials

  • Refrigeration and Electrical Switch Gear.
  • Electrical connections and materials
  • Refrigeration Copper pipework
  • Armoflex Copper Pipe insulation material
  • Refrigerant R404a.
  • Electronic controls. cable trays, flarenuts
  • Weather Proof Lighting, Electrical controls.


Interconnecting Material

  • Installation, testing and Commissioning.
  • Consumables and Steel Supports - U-channels, PVC internal Angle Lines (75 X 75 MM), PPGI Flashing (50 X 150 MM)
  • Mounting channels.
  • Defrost drainage mechanism
  • Brackets.
  • Wall assembly materials - silicon, mounting Channels
  • Labor setting to work and commissioning



Installation Cost (labor setting to work and testing)

  • labor setting to work and testing
  • Test Run the machine and observation.
  • Training and Handover with the staff who will use the cold room.
  • Do's and Don'ts training.
  • Handover the Key
  • FMC Plan.